 |
Journal articles
Experimental methodology to assess the dynamic equivalent stiffness properties of elliptical orthotropic plates
Abstract : This paper deals with the dynamic characterisation of plate structures with elliptical orthotropic stiffness properties, using an equivalent thin plate theory using a wave fitting approach. The method consists in projecting the experimentally determined transverse displacement field of a plate on an analytical Green’s function of an elliptical orthotropic plate based on Hankel’s functions. The error between the projected and measured fields is then minimized, varying the characteristics of the function until an optimal fit is reached. The thus obtained characteristics are the two flexural rigidities defining the elliptical orthotropy of the plate, and the orthotropy angle. This fitting procedure is applied at each frequency, enabling the determination of frequency dependent dynamic material properties. The method is applied to a honeycomb sandwich panel to validate the proposed fitting approach. The identified flexural rigidities are compared to the estimations obtained by means of an analytical model and the IWC (Inhomogeneous Wave Correlation) method assuming three different type of plate characteristics (anisotropic, orthotropic and elliptical orthotropic). For the elliptical orthotropic assumption, consistent results are observed between the methods and the model over a large frequency range (from 1 to 50 kHz).
https://hal.archives-ouvertes.fr/hal-03040106
Contributor : Kerem Ege <>
Submitted on : Monday, December 28, 2020 - 4:07:06 PM
Last modification on : Saturday, January 16, 2021 - 12:03:53 AM
Contributor : Kerem Ege <>
Submitted on : Monday, December 28, 2020 - 4:07:06 PM
Last modification on : Saturday, January 16, 2021 - 12:03:53 AM
File
Marchetti_2021_JSV_HAL.pdf
Files produced by the author(s)
