V. G. Arakelian and M. R. Smith, Shaking Force and Shaking Moment Balancing of Mechanisms: A Historical Review With New Examples, Journal of Mechanical Design, vol.127, issue.2, pp.334-339, 2005.
DOI : 10.1115/1.1829067

V. H. Arakelian and M. R. Smith, Erratum: Shaking force and shaking moment balancing of mechanisms: A historical review with new examples, Mechanical Design, vol.127, 1035.

S. Briot, V. H. Arakelian, and S. Guégan, PAMINSA: A new family of partially decoupled parallel manipulators. Mechanism and Machine Theory 44, pp.425-444, 2009.

W. Chung and H. S. Cho, On the dynamic characteristics of a balance PUMA-760 robot, IEEE Transactions on Industrial Electronics, vol.35, issue.2, pp.222-230, 1988.
DOI : 10.1109/41.192653

D. Corbel, M. Gouttefarde, O. Company, and F. Pierrot, Towards 100G with PKM. is actuation redundancy a good solution for pick-and-place? Proc, IEEE International Conference on Robotics and Automation, pp.4675-4682, 2010.
URL : https://hal.archives-ouvertes.fr/lirmm-00486231

B. Demeulenaere and R. S. Berkof, Improving Machine Drive Dynamics: A Structured Design Approach Toward Balancing, Journal of Mechanical Design, vol.130, issue.8, 2008.
DOI : 10.1115/1.2920473

O. Fischer, Theoretische grundlagen für eine Mechanik der lebenden Körper, 1906.

S. Foucault and C. M. Gosselin, Synthesis, Design, and Prototyping of a Planar Three Degree-of-Freedom Reactionless Parallel Mechanism, Journal of Mechanical Design, vol.126, issue.6, pp.992-999, 2004.
DOI : 10.1115/1.1798211

M. Jean and C. M. Gosselin, Static balancing of planar parallel manipulators, Proceedings of IEEE International Conference on Robotics and Automation, pp.3732-3737, 1996.
DOI : 10.1109/ROBOT.1996.509282

T. G. Lim, H. S. Cho, and W. K. Chung, A parameter identification method for robot dynamic models using a balancing mechanism, Robotica, vol.7, issue.04, pp.327-337, 1989.
DOI : 10.1177/027836498600500306

T. G. Lim, H. S. Cho, and W. K. Chung, Payload capacity of balanced robotic manipulators, Robotica, vol.6, issue.02, pp.117-123, 1990.
DOI : 10.1109/41.192653

R. Ricard and C. M. Gosselin, On the development of reactionless parallel manipulators, Proc. of ASME-DETC, p.14098, 2000.

V. Van-der-wijk, B. Demeulenaere, C. Gosselin, and J. L. Herder, Comparative Analysis for Low-Mass and Low-Inertia Dynamic Balancing of Mechanisms, Journal of Mechanisms and Robotics, vol.4, issue.3, p.31008, 2012.
DOI : 10.1115/1.4006744

V. Van-der-wijk and J. L. Herder, Dynamic balancing of mechanisms by using an actively driven counter-rotary counter-mass for low mass and low inertia, Proc. of the Second Int. Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, pp.241-251, 2008.

V. Van-der-wijk and J. L. Herder, Guidelines for Low Mass and Low Inertia Dynamic Balancing of Mechanisms and Robotics, Kröger and Wahl, Advances in Robotics Research, Proc. of the German Workshop on Robotics, pp.21-30, 2009.
DOI : 10.1007/978-3-642-01213-6_3

V. Van-der-wijk and J. L. Herder, Inherently Balanced 4R Four-Bar Based Linkages, Latest Advances in Robot Kinematics , Proc. of the IFToMM 13th Int. Symposium on Advances in Robot Kinematics, pp.309-316, 2012.
DOI : 10.1007/978-94-007-4620-6_39

V. Van-der-wijk and J. L. Herder, Synthesis method for linkages with center of mass at invariant link point -pantograph based mechanisms. Mechanism and Machine Theory 48, pp.15-28, 2012.

V. Van-der-wijk, J. L. Herder, and B. Demeulenaere, Comparison of Various Dynamic Balancing Principles Regarding Additional Mass and Additional Inertia, Journal of Mechanisms and Robotics, vol.1, issue.4, pp.4-1006, 2009.
DOI : 10.1115/1.3211022

V. Van-der-wijk, S. Krut, F. Pierrot, and J. L. Herder, Generic method for deriving the general shaking force balance conditions of parallel manipulators with application to a redundant planar 4-RRR parallel manipulator, Proceedings of the 13th IFToMM World Congress on Mechanism and Machine Science, pp.12-523, 2011.
URL : https://hal.archives-ouvertes.fr/lirmm-00609009