Dynamics and control of redundantly actuated parallel manipulators, IEEE/ASME Transactions on Mechatronics, vol.8, issue.4, pp.483-491, 2003. ,
DOI : 10.1109/TMECH.2003.820006
Generic Method for Deriving the General Shaking Force Balance Conditions of Parallel Manipulators with Application to a Redundant Planar 4-RRR Parallel Manipulator, The 13th World Congress in Mechanism and Machine Science, 2011. ,
URL : https://hal.archives-ouvertes.fr/lirmm-00609009
Is Actuation Redundancy a Good Solution for Pick and Place, International Conference on Robotics and Automation, pp.4675-4682, 2010. ,
URL : https://hal.archives-ouvertes.fr/lirmm-00486231
Time-Optimal Trajectory Generation of a Fast-Motion Planar Parallel Manipulator, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.754-759, 2006. ,
DOI : 10.1109/IROS.2006.282625
Jerk-bounded manipulator trajectory planning: design for real-time applications, IEEE Transactions on Robotics and Automation, vol.19, issue.1, pp.42-52, 2003. ,
DOI : 10.1109/TRA.2002.807548
A projection method for the elimination of contradicting control forces in redundantly actuated PKM, 2011 IEEE International Conference on Robotics and Automation, pp.3218-3223, 2011. ,
DOI : 10.1109/ICRA.2011.5979721
A comparison study on the dynamics of planar 3-DOF 4-RRR, 3-RRR and 2-RRR parallel manipulators, Robotics and Computer-Integrated Manufacturing, vol.27, issue.1, pp.150-156, 2011. ,
DOI : 10.1016/j.rcim.2010.07.001
Design and experimental evaluation of a dynamically balanced redundant planar 4-RRR parallel manipulator, The International Journal of Robotics Research, vol.1, issue.6, pp.744-759, 2013. ,
DOI : 10.1177/0278364913484183
URL : https://hal.archives-ouvertes.fr/lirmm-00822698
Delta parallel robot-the story of success, Newsletter, 2001. ,
Trajectory Planning for Constrained Parallel Manipulators, Journal of Mechanical Design, vol.125, issue.4, p.709, 2003. ,
DOI : 10.1115/1.1623187
Modeling and design of a parallel robot for laser-cutting applications, International Conference on Modeling, Identification and Control (IASTED'02), pp.518-522, 2002. ,
Etude de l'emploi des machines outils structure parallle en usinage (Doctoral dissertation, 2006. ,
A Review on the Dynamic Control of Parallel Kinematic Machines: Theory and Experiments, The International Journal of Robotics Research, vol.31, issue.5, pp.395-416, 2009. ,
DOI : 10.1177/0278364908096236
A Survey on Control of Parallel Manipulator, Key Engineering Materials, vol.339, pp.307-313, 2007. ,
DOI : 10.4028/www.scientific.net/KEM.339.307
Experimental evaluation of model-based controllers on a direct-drive robot arm, Mechatronics, vol.11, issue.3, pp.267-282, 2001. ,
DOI : 10.1016/S0957-4158(00)00008-8