K. Chinzei, N. Hata, F. Jolesz, and R. Kikinis, Mr compatible surgical assist robot: system integration and preliminary feasibility study, Med. Image Comput. Comput. Assist. Interv, pp.921-930, 2000.
DOI : 10.1007/978-3-540-40899-4_95

URL : https://link.springer.com/content/pdf/10.1007%2F978-3-540-40899-4_95.pdf

A. Goldenberg, J. Trachtenberg, W. Kucharczyk, Y. Yi, M. Haider et al., Robotic system for closed-bore MRI-guided prostatic interventions, IEEE/ASME Trans. Mechatron, vol.13, issue.3, pp.374-379, 2008.
DOI : 10.1109/tmech.2008.924122

H. Su, M. Zervas, G. Cole, C. Furlong, and G. Fischer, Real-time mri-guided needle placement robot with integrated fiber optic force sensing, Proceedings of the IEEE International Conference on Robotics and Automation, pp.1583-1588, 2011.

G. Fischer, I. Iordachita, C. Csoma, J. Tokuda, S. Dimaio et al., MRI-compatible pneumatic robot for transperineal prostate needle placement, IEEE/ASME Trans. Mechatron, vol.13, issue.3, pp.295-305, 2008.
DOI : 10.1109/tmech.2008.924044

URL : http://europepmc.org/articles/pmc2974180?pdf=render

A. Patriciu, D. Petrisor, M. Muntener, D. Mazilu, M. Schar et al., Automatic brachytherapy seed placement under MRI guidance, IEEE Trans. Biomed. Eng, vol.54, issue.8, pp.1499-1506, 2007.
DOI : 10.1109/tbme.2007.900816

URL : http://europepmc.org/articles/pmc3099459?pdf=render

S. Abdelaziz, L. Esteveny, P. Renaud, B. Bayle, L. Barbé et al., Design considerations for a novel MRI compatible manipulator for prostate cryoablation, Int. J. Comput. Assist. Radiol. Surg, vol.6, issue.6, pp.811-819, 2011.

S. Abdelaziz, L. Esteveny, L. Barbé, P. Renaud, B. Bayle et al., Design of an MRI-compatible cable-driven manipulator with new instrumentation and synthesis methods, ASME J. Mech. Des, vol.9, issue.136, pp.1-10, 2014.

S. Kawamura, H. Kino, and N. Cho, High-speed manipulation by using parallel wire-driven robots, Robotica, vol.18, issue.1, pp.13-21, 2000.
DOI : 10.1017/s0263574799002477

S. Fang, D. Franitza, M. Torlo, F. Bekes, and M. Hiller, Motion control of a tendon-based parallel manipulator using optimal tension distribution, IEEE/ASME Trans. Mechatron, vol.9, issue.3, pp.561-568, 2004.

M. Gouttefarde, J. Lamaury, C. Reichert, and T. Bruckmann, A versatile tension distribution algorithm for n-dof parallel robots driven by n+2 cables, IEEE Trans. Robot, vol.31, issue.6, pp.1444-1457, 2015.
URL : https://hal.archives-ouvertes.fr/lirmm-01304458

P. Gallina, A. Rossi, and R. Williams, Planar cable-direct-driven robots, Proceedings of the ASME IDETC/CIE Mechanics and Robotics Conference, 2001.

H. Kino, C. Cheah, S. Yabe, S. Kawamura, and S. Arimoto, A motion control scheme in task oriented coordinates and its robustness for parallel wire driven systems, International Conference on Advanced Robotics, pp.545-550, 1999.

H. Kino, T. Yahiro, F. Takemura, and T. Morizono, Robust PD control using adaptive compensation for completely restrained parallel-wire driven robots: translational systems using the minimum number of wires under zero-gravity condition, IEEE Trans. Robot, vol.23, issue.4, pp.803-812, 2007.

E. Laroche, R. Chellal, L. Cuvillon, and J. Gangloff, A preliminary study for H-infinity control of parallel cable-driven manipulators, Cable-Driven Parallel Robots, pp.353-369, 2013.
DOI : 10.1007/978-3-642-31988-4_22

C. Reichert, K. Müller, and T. Bruckmann, Robust internal force-based impedance control for cable-driven parallel robots, in: Cable-Driven Parallel Robots, pp.131-143, 2015.
DOI : 10.1007/978-3-319-09489-2_10

A. Salimi, A. Ramezanifar, J. Mohammadpour, K. M. Grigoriadis, and N. V. Tsekos, Design and qualification of a parallel robotic platform to assist with beating-heart intracardiac interventions, Mech. Robot, vol.6, issue.2, p.21004, 2014.

S. Abdelaziz, L. Esteveny, L. Barbé, P. Renaud, B. Bayle et al., Development of a MR-compatible cable-driven manipulator: design and technological issues, Proceedings of the IEEE International Conference on Robotics and Automation, pp.1488-1494, 2012.

M. A. Khosravi and H. D. Taghirad, Robust PID control of fully-constrained cable driven parallel robots, Mechatronics, vol.24, issue.2, pp.87-97, 2014.

A. Ming and T. Higuchi, Study on multiple degree-of-freedom positioning mechanism using wires part i: concept, design and control, Int. J. Jpn. Soc. Precis. Eng, vol.28, issue.2, pp.131-138, 1994.

C. B. Pham, G. Yang, and S. H. Yeo, Dynamic analysis of cable-driven parallel mechanisms, Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp.612-617, 2005.

T. Bruckmann, A. Pott, and M. Hiller, Calculating force distributions for redundantly actuated tendon-based stewart platforms, Advances in Robot Kinematics, pp.403-412, 2006.

R. Verhoeven, Analysis of the workspace of tendon-based stewart platforms

A. Pott, T. Bruckmann, and L. Mikelsons, Closed-form force distribution for parallel wire robots, Computational Kinematics, pp.25-34, 2009.

L. Mikelsons, T. Bruckmann, M. Hiller, and D. Schramm, A real-time capable force calculation algorithm for redundant tendon-based parallel manipulators, Proceedings of the IEEE International Conference on Robotics and Automation, pp.3869-3874, 2008.

A. Deo and I. Walker, Minimum effort inverse kinematics for redundant manipulators, IEEE Trans. Robot. Autom, vol.13, issue.5, pp.767-775, 1997.

D. Omrcen, L. Zlajpah, and B. Nemec, Compensation of velocity and/or acceleration joint saturation applied to redundant manipulator, Robot. Auton. Syst, vol.55, issue.4, pp.337-344, 2007.

F. Flacco, A. De-luca, and O. Khatib, Motion control of redundant robots under joint constraints: saturation in the null space, 2012 IEEE International Conference on Robotics and Automation (ICRA), pp.285-292, 2012.

S. Bouchard, C. Gosselin, and B. Moore, On the ability of a cable-driven robot to generate a prescribed set of wrenches, ASME J. Mech. Robot, vol.2, issue.1, pp.1-10, 2010.