S. Kawamura, W. Choe, S. Tanaka, and S. Pandian, Development of an ultrahigh speed robot falcon using wire drive system, IEEE International Conference on Robotics and Automation, 1995.

C. Lambert, M. Nahon, and D. Chalmers, Implementation of an aerostat positioning system with cable control, IEEE/ASME Transactions on Mechatronics, vol.12, issue.1, 2007.

J. Merlet and D. Daney, A portable, modular parallel wire crane for rescue operations, IEEE International Conference on Robotics and Automation, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00987462

A. Pott, H. Mutherich, W. Kraus, V. Schmidt, P. Miermeister et al., Ipanema: A family of cable-driven parallel robots for industrial applications, 2013.

M. Gouttefarde, J. Collard, N. Riehl, and C. Baradat, Geometry selection of a redundantly actuated cable-suspended parallel robot, IEEE Transactions on Robotics, vol.31, issue.2, 2015.
URL : https://hal.archives-ouvertes.fr/lirmm-01221397

L. Gagliardini, S. Caro, M. Gouttefarde, and A. Girin, Discrete reconfiguration planning for cable-driven parallel robots, Mechanism and Machine Theory, vol.100, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01400440

S. Kawamura, H. Kino, and C. Won, High-speed manipulation by using parallel wire-driven robots, Robotica, vol.18, issue.1, 2000.

S. Behzadipour and A. Khajepour, Stiffness of cable-based parallel manipulators with application to stability analysis, Journal of Mechanical Design, vol.128, issue.1, 2006.

X. Weber, L. Cuvillon, and J. Gangloff, Active vibration canceling of a cable-driven parallel robot using reaction wheels, IEEE/RSJ International Conference on Intelligent Robots and Systems, 2014.

X. Diao and O. Ma, Vibration analysis of cable-driven parallel manipulators, Multibody System Dynamics, vol.21, issue.4, 2009.

M. A. Khosravi and H. D. Taghirad, Dynamic modeling and control of parallel robots with elastic cables: singular perturbation approach, IEEE Transactions on Robotics, vol.30, issue.3, 2014.

F. Montgomery and J. Vaughan, Modeling and control of a cabledriven robot for inspection of wide-area horizontal workspaces, Dynamic Systems and Control Conference, 2016.

N. C. Singer and W. P. Seering, Preshaping command inputs to reduce system vibration, Journal of Dynamic Systems, Measurement, and Control, vol.112, issue.1, 1990.

X. Weber, L. Cuvillon, and J. Gangloff, Active vibration canceling of a cable-driven parallel robot in modal space, IEEE International Conference on Robotics and Automation, 2015.

Y. Cheng, G. Ren, and S. Dai, Vibration control of gough-stewart platform on flexible suspension, IEEE Transactions on Robotics, vol.19, issue.3, 2003.

S. Lee and W. Book, Robot vibration control using inertial damping forces, CISM-IFToMM Symposium Symposium on Robot Design, Dynamics and Control, 1990.

M. Rushton and A. Khajepour, Optimal actuator placement for vibration control of a planar cable-driven robotic manipulator, American Control Conference, 2016.

S. Trimpe and R. D'andrea, The balancing cube: A dynamic sculpture as test bed for distributed estimation and control, IEEE Control Systems Magazine, vol.32, issue.6, 2012.

T. Libby, A. M. Johnson, E. Chang-siu, R. Full, and D. Koditschek, Comparative design, scaling and control of appendages for inertial reorientation, IEEE Transactions on Robotics, vol.32, issue.6, 2016.

G. He, X. Tan, X. Zhang, and Z. Lu, Modeling, motion planning and control of one-legged hopping robot actuated by two arms, Mechanism and Machine Theory, vol.43, issue.1, 2008.

F. Montgomery and J. Vaughan, Suppression of cable suspended parallel manipulator vibration utilizing input shaping, Conference on Control Technology and Applications, 2017.

M. Rushton, Vibration control in cable robots using a multiaxis reaction system, 2016.

F. Ghorbel, J. Y. Hung, and M. W. Spong, Adaptive control of flexible joint manipulators, IEEE Control Systems Magazine, vol.9, issue.7, 1989.

J. Lin, Z. Huang, and P. Huang, An active damping control of robot manipulators with oscillatory bases by singular perturbation approach, Journal of sound and vibration, 2007.

B. Siciliano and W. J. Book, A singular perturbation approach to control of lightweight flexible manipulators, International Journal of Robotics Research, vol.7, issue.4, 1989.

P. V. Kokotovic, R. E. O'malley, and P. Sannuti, Singular perturbations and order reduction in control theory-an overview, Automatica, vol.12, issue.2, 1976.

R. Williams, P. Gallina, and J. Vadia, Planar translational cable-directdriven robots, Journal of Field Robotics, vol.20, issue.3, 2003.

S. Oh and S. K. , Generation of feasible set points and control of a cable robot, IEEE Transactions on Robotics, vol.22, issue.3, 2006.

N. Riehl, M. Gouttefarde, C. Baradat, and F. Pierrot, On the determination of cable characteristics for large dimension cable-driven parallel mechanisms, IEEE International Conference on Robotics and Automation, 2010.
URL : https://hal.archives-ouvertes.fr/lirmm-00486225

H. K. Khalil and N. Systems, , 2001.

X. Jiang and C. Gosselin, Dynamically feasible trajectories for threedof planar cable-suspended parallel robots, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2014.

M. Gouttefarde, D. Daney, and J. Merlet, Interval-analysis-based determination of the wrench-feasible workspace of parallel cabledriven robots, IEEE Transactions on Robotics, vol.27, issue.1, 2011.
URL : https://hal.archives-ouvertes.fr/lirmm-00573491